TURN ON YOUR LIFE!  Mobile Version    中文 | English

NEWS
Press Center

Environmental Protection

86-769-81376988
Your present location:Home >> Corporate News >> Charger classification

Charger classification

Writer:en.turnmax-tech.comSource:东莞市腾茂电子有限公司 Date:2017-07-11
The following is a brief introduction to the classification of the charger. Due to time. Here first simply said next. There is time to improve the information.
 
 
 
According to the use of classification.
 
 
 
   Travel charger: is the abbreviation of travel mobile phone charger, a portable charger, suitable for travel when used in other countries to use. So the charger input parameters should be 100-240V, 50-60Hz. The fast charge can only be used at a specific voltage.
 
 
 
Car charger: car charger is simply referred to, that is used in the car charger, usually one end into the car cigarette lighter, the other end directly connected to charge the electrical equipment, pay attention to the car can use the voltage, small vehicles The input voltage standard is 12V. Under normal circumstances we charger manufacturers in the test when the test range between 9-15V. Some large vehicles provide an input voltage of 24V. Our manufacturers are in accordance with the following 28V test. In the use of the process need to pay attention to the low-voltage car charger can not be used in the 24V vehicles. Doing so may damage the internal parts of the charger.
 
 
 
Cradle: is a relatively large size of the mobile phone charger, often with LED or LCD prompts, can be divided into single slot  (only rechargeable phone or rechargeable battery only) and double slot (suitable for home Or office).
 
 
 
 
 
Sort by battery type
 
1, Ni-MH / Ni-Cd battery charger. According to a single 1.5V calculation
 
2, lithium battery charger. According to a single battery 4.25V calculation.
 
3, lead-acid battery charger. According to a single battery 6.9V-7.3V calculation. Lead-acid batteries are divided into a float function and no float function. Lead - acid battery three - stage float charger. The no-load voltage is 6.9V. Charging voltage up to 7.3V. And no float is no-load voltage of 7.3V.
 
 
More Power Supply Please continue to follow the details TURNMAX Official website or scan two-dimensional code
 
 
 

TypeInfo: Corporate News

Keywords for the information:充电器生产家  Charger production home